Vaginal mechanism and features
Active locking with passive locking
A locking screw that allows disabling an active locking mechanism, for carrying with a passive locking in the heart
.Screw towards passive locking level
Adaptation to the intention of projection
High front sight adjustment
*Left holster available
Carrying options
(PBH) rubber insert pedal + integral belt holder
(LH PBH) rubber insert pedal + left integral belt holder
Ergonomics
The holster profile has an extremely low signature. The tightest outer pouch we've designed so far.
The structure of the holster allows a full grip of the gun handle without the meeting of the thumb or other fingers if any of the holster parts.
The holster connects to the trouser belt using a pedal equipped with a rubber insert to prevent displacement and an integral belt clip for full fixation of the holster to the belt.
Product material
reinforced polymer
Weight 95 grams.
Instructions for use
Place the holster at three or four o'clock on the pant, with the pedal pulled all the way on the pant waistband, until the hooks are caught below the lower belt line. Tighten the trouser belt
Press the release button and pull up quickly and with full intent, as if you were in an emergency situation
The holster contains a passive locking power adjustment screw. Adjust the screw to your desired locking strength
The holster contains a selection mechanism between active and passive locking. The mechanism - the wheel, can be rotated with the arrow pointing towards a closed lock in order to disable the active release button. Now the holster is in a passive lock mode - for 1. Another half turn in the direction of the open lock, releases the release button from deactivation and returns it to operation. The holster is now in a state of active and passive locking - level 2. The selector wheel can be turned using a flat head screwdriver or using the ring found at the bottom of a 9mm bullet case.
To cancel the passive locking, the adjustment screw must be loosened a few turns counter-clockwise, but full loosening must be avoided. The bolt must always be held in place by the nut
