Police holster with 2 security levels Fobus Le2

Case mechanism and features

An active lock operated by the thumb and a passive lock that locks the exhaust housing

Internal polymer spring that eliminates lateral vibrations.

A low carrier for a 2.25 inch police belt with a quick connection and an anchor strap for the hip.

Also available for lefties

Ergonomics

The thumb-operated release button is located in the area where the hand grips the pistol grip as if there were no holster.

The thought in the design was to place the release button in the natural area where the hand goes when holding the gun, without thinking about activating any mechanism.

The result: a withdrawal feeling without a holster.

The holster sits on a dedicated quicklock belt carrier that allows free and easy movement in space. It gives a secure sense of connection while maintaining a high offensive ability.

Tested matches

Glock 19, 19X, 17, 45

Flashlight: TLR7, Tru Point, OLIGHT BALDR Mini, BALDDR Pro R, PL-PRO VALKYRIE

Throwing sight: Meprolight MicroRDS, HOLOSUN Reflex Sights

Dimensions of the lantern housing: length: 1.4", height 1.7", width 1.5"

Materials

Three types of polymer, reinforced with glass fibers, hip straps made of patchy nylon.

How to use:

The pouch consists of two parts. LE2 holster body and MEX2 belt or hip carrier.

1. Place the MEX2 carrier at 3 o'clock on the waistband of the pants.

2. Connect the thigh straps to each other.

3. Connect the LE2 to the MEX2 carrier by sliding the rails on the back of the case against the rails on the carrier, until a locking click is heard.

4. Lock the holster to the carrier using a tab located on the carrier and visible from the side, between the back of the holster and the carrier. Use the illustration in the attached user manual. Don't skip this step!

5. Put the gun in the holster.

6. Close the hood (locking bow) over the barrel of the gun until it locks into place.

7. To pull out the gun, press the release button located on the inside of the holster, in a way that simulates a natural grip of the gun handle as if there is no holster. The thumb will meet the button on the way to the grip of the gun.

8. The holster has a passive locking mechanism. After releasing the hood as explained in section 7, pull the gun up forcefully.

9. In order to detach the LE2 holster from the MEX2 carrier, the gun must first be removed from the holster.

10. Insert a finger in the center of the holster and look for an opening where you will find the locking tab. Open it all the way up.

11. Below the locking tab is the release lever. Press the release lever while pushing the holster upwards until it is completely detached from the rails.